Publicidad
Idiomas disponibles
Idiomas disponibles
water temperatures begin to rise. This is also the ideal time to
replace the filter pads.
• Reassemble all parts and place in water before reconnecting
to the power source.
LIGHT SET
• The lights may require cleaning from time to time for optimal
performance.
• Before cleaning, always disconnect from the power source.
• Use a soft cloth or brush and warm water to clean the parts.
• Reconnect to the power source when you are finished.
TROUBLESHOOTING
IF THE PUMP FAILS TO OPERATE:
• Check to make sure the power cord is plugged in and the
pump is getting power.
• Check the pump outlet and any tubing, fountains, spitters etc.
for kinks or obstructions.
• Remove the front cover and/or pump cover, and impeller
cover to expose the impeller. Turn the impeller to ensure that
it is not broken or jammed.
IF THE PERFORMANCE OF THE PUMP IS NOT SATISFACTORY
OR THE PUMP DOES NOT FLOW EVENLY:
• Check to make sure the pump is completely submerged in
water
• Check to make sure the impeller and the impeller housing are
clean.
• Adjust flow control.
IF LIGHTS FAIL TO ILLUMINATE:
• Check that lights are getting power by testing another
appliance in the same power outlet.
• The light is designed to turn on when it gets dark, and turn off
when it gets light. To activate the light during daylight hours,
cover the sensor.
• If lights do not turn off during daytime, check sensor. Make
sure the sensor faces up and is not covered by dirt or debris.
IF TURTLE SPITTER FAILS TO OPERATE:
• Adjust flow control on diverter valve, make sure water is run
to spitter.
• Check the spitter outlet, inlet and tubing for kinks or
obstructions.
For more information on product maintenance and
maintenance videos, visit www.smart-pond.com/
maintenance
PLEASE CALL CUSTOMER CARE BEFORE RETURNING ITEM TO LOWE'S: 1-888-755-4497
9
Publicidad
