Publicidad
Idiomas disponibles
Idiomas disponibles
Step 7. Connect the
extension tubes to
the diverter valve.
Make sure the arrow
is pointing up and
the diverter valve is
connected as shown.
Step 8. Connect 1/2
in. ID tubing onto
the second output
of the diverter valve.
Connect the other end
of tubing to the Turtle
Spitter.
Step 9. Connect the
fountain nozzle to the
top of the extension
tube.
Step 10. Place the
assembled filter kit
in water. Arrange the
Turtle Spitter near
the edge of the pond
so that the mouth is
facing the pond.
Step 11. Utilize
the pivoting base
to achieve a more
vertical fountain
display if needed.
Step 12. Connect the
pump into a properly
grounded electrical
outlet.
NOTE: You can adjust
the flow control as
needed with the
diverter valve.
6
VISIT WWW.SMART-POND.COM FOR PRODUCT INFORMATION AND TIPS.
1/2 in. tubing
nozzle
1/2 in.
tubing
10
7
8
9
11
12
Publicidad
