Kärcher HDS 1000 BE Manual De Instrucciones página 21

Device elements
Figures 1+2
1 Device for manual start
2 Electric starter system
3 Fuel tank
4 Manometer
5 Battery
6 High pressure nozzle
7 Spray lance EASY!Lock
8 Trigger gun EASY!Force
9 High pressure hose EASY!Lock
10 High-pressure connection EASY!Lock
11 Fuel tank
12 Connection for water supply with filter
13 Pressure/ uantity regulation
14 Pressure tank
15 Fuel pump with fuel filter
16 Burner blower
17 Electronics system
18 Oil sight glass
19 Safety valve
20 Burner cover
21 Continuous heater
22 Ignition plug
23 Burner looking glass
24 Nozzle holder
25 Float tank
26 Softener container
27 Solenoid valve
28 Water shortage safeguard
29 Sieve in the water shortage safeguard
30 Pressure switch
31 Oil filling container
32 High-pressure pump
33 Nameplate
34 Oil drain screw (engine)
35 Oil dip (engine)
36 Detergent suction hose with filter
37 Oil drain screw (pump)
38 Safety lever
39 Trigger
40 Safety latch of the hand spray gun
perating field
Figure 3
1 Power switch
2 Fuel indicator lamp
3 Li uid softner indicator lamp
4 Dosage valve for detergent
5 Key switch (electric starter system)
6 Indicator lamp "Ignition ON"
Symbols on the machine
High-pressure jets can be dan-
gerous if improperly used. The
jet may not be directed at persons, animals,
live electrical equipment or at the appliance
itself.
Risk of poisoning! Do not inhale
exhaust fumes.
Risk of burns on account of hot
surfaces!
Proper use
Note: Applicable only for Germany: The
appliance is meant only for mobile (non-
stationary) operations.
– The appliance is used especially at lo-
cations where there is no electrical con-
nection and it is necessary to work with
hot water.
– Cleaning of: Machines, Vehicles, Struc-
tures, Tools, Facades, Terraces, Gar-
dening tools, etc.
DANGER
Risk of injury! Follow the respective safety
regulations when operating at gas stations
or other dangerous areas.
Please do not let mineral oil contaminated
waste water reach soil, water or the sew-
age system. Perform engine cleaning and
bottom cleaning therefore only on speci-
fied places with an oil trap.
EN – 2 21