Descargar Imprimir esta página

Makita EF1550RH Manual De Instrucciones página 18

Publicidad

Idiomas disponibles

Idiomas disponibles

REPLACEMENT OF FUEL PIPE
CAUTION: INFLAMMABLES STRICTLY PROHIBITED
Interval of Cleaning and Inspection: Daily (every 10 operating hours)
Replacement: Annually (every 200 operating hours)
Replace the fuel pipe every year, regardless of operating frequency. Fuel
leakage may lead to fire.
If any leakage is detected during inspection, replace the oil pipe immediately.
INSPECTION OF BOLTS, NUTS AND SCREWS
– Retighten loose bolts, nuts, etc.
– Check for fuel and oil leakage.
– Replace damaged parts with new ones for safety operation.
CLEANING OF PARTS
– Keep the engine always clean.
– Keep the cylinder fins free of dust or dirt. Dust or dirt adhering to the fins will
cause piston seizure.
REPLACEMENT OF GASKETS AND PACKINGS
In reassembling after the engine is dismounted, be sure to replace the gaskets and packings with new ones.
Any maintenance of adjustment work that is not included and described in this manual is only to be performed by Authorized Service Agents.
– Be kind to the environment. Operate the Power Sprayer with as little noise and pollution as possible. In particular check the correct
adjustment of the carburetor.
– Clean the Power Sprayer at regular intervals and check that all screws and nuts are securely tightened.
– Never service or store the Power Sprayer in the vicinity of open flames, sparks, etc.
– Always store the Power Sprayer in a well-ventilated locked room and with an emptied fuel tank.
18
Fuel pipe

Publicidad

loading