Makita EF1550RH Manual De Instrucciones página 5

Start the Power Sprayer only in accordance with the instructions.
– Do not use any other methods for starting the engine!
– Use the Power Sprayer and the tools only for such applications as specified.
– Only start the Power Sprayer engine, after the entire assembly is done.
Operation of the device is only permitted after all the appropriate accessories
are attached!
– The engine is to be switched off immediately in case of any engine problems.
– During operation always hold the grip with both hands.
Always ensure a safe footing.
– Operate the Power Sprayer in such a manner as to avoid inhalation of
the exhaust gases. Never run the engine in enclosed rooms (risk of gas
poisoning). Carbon monoxide is an odorless gas.
– Switch off the engine when resting and when leaving the Power Sprayer
unattended, and place it in a safe location to prevent danger to others or
damage to the machine.
– Never put the hot Power Sprayer onto dry grass or onto any combustible
materials.
– Never operate the engine with faulty exhaust muffler.
– Shut off the engine during transport.
– During transport over long distances the tool protection included with the
equipment must always be used.
– Ensure safe position of the Power Sprayer during car transportation to avoid
fuel leakage.
– When transporting the Power Sprayer, ensure that the fuel tank is completely
empty.
– When unloading the Power Sprayer from the truck, never drop the Engine to
the ground or this may severely damage the fuel tank.
– Except in case of emergency, never drop or cast the Power Sprayer to the
ground or this may severely damage the Power Sprayer.
– Remember to lift the entire equipment from the ground when moving the
equipment. Dragging the fuel tank is highly dangerous and will cause damage
and leakage of fuel, possibly causing fire.
Refuelling
– Shut off the engine during refuelling, keep away from open flames and do not
smoke.
– Avoid skin contact with mineral oil products. Do not inhale fuel vapor. Always
wear protective gloves during refuelling. Change and clean protective clothing
at regular intervals.
– Take care not to spill either fuel or oil in order to prevent soil contamination
(environmental protection). Clean the Power Sprayer immediately after fuel
has been spilt.
– Avoid any fuel contact with your clothing. Change your clothing instantly if
fuel has been spilt on it (to prevent clothing catching fire).
– Inspect the fuel cap at regular intervals making sure that it can be securely
fastened and does not leak.
– Carefully tighten the fuel tank cap. Change location to start the engine (at
least 3 meters away from the place of refuelling).
– Never refuel in closed rooms. Fuel vapors accumulate at ground lever (risk of
explosions).
– Only transport and store fuel in approved containers. Make sure the fuel
stored is not accessible to children.
• Resting
• Transport
• Refuelling
• Maintenance
• Tool replacement
5
3 meters