Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 8
Carefully turn the unit over on its front side.
Position back panel as shown. Align squarely with all edges and
nail straight into back edges as shown.
Assure that our unit is square.
Distance from corner to corner
must be equal as shown.
systembuild.com
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT
13
AND MUST BE INSTALLED PROPERLY.
(x50)
I
Raw Surface Shown
16
13
Flush bottom edge of the back
panel with the bottom edge of
bottom (D).
Publicidad
