Basic Procedure - JVC KD-LX50 Manual De Instrucciones

Basic Procedure

1
2
3
Speak one of the Operation Commands (listed on page 24) to
the microphone while "SPEAK" is flashing on the display.
If your voice cannot be recognized
The unit will ask you to speak again (and more) until "V.COMMAND" disappears from the
display.
If your voice command cannot be carried out and "V.COMMAND" disappears, repeat from
step 2.
1,2
4
ATT/STR*
Voice remote
Turn on the power.
The display illuminates and the control panel comes out.
Activate the Voice Recognition System.
"SPEAK" starts flashing on the display after the voice navigation "Please
speak now" (or a beep).
The receiver performs what you command it to do. (Ex. when
you speak "FM.")
* ATT stands for "attenuator,"
and STR stands for "store."
TO BE CONTINUED ON THE NEXT PAGE
STOP
PLAY
25