Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains
chemicals (known to the State of California) to cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
● Lead based paints
● Crystalline silica from bricks, cement and other masonry products
● Arsenic and chromium from chemically treated lumber
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your
exposure to these chemicals, work in a well-ventilated area and work with approved safety equipment, such
as dust masks that are specially designed to filter out microscopic particles.
PRODUCT SPECIFICATIONS
MOTOR
Power Source.......................... 120V AC, 60HZ, 1.6Amp
Speed (no load).......................... 400~1600 SPM
Speed Control ............................ Electric
BLADE
Type............................................ Pin-end or Plain-end
Depth of Throat........................... 16 in.
Blade Stroke............................... 11/16 in.
Depth of 45° Cut......................... 1-1/16 in. Left ; 3/4 in. Right
Depth of 90° Cut......................... 2-1/8 in.
To avoid electrical hazards, fire hazards or damage to the scroll saw, use proper circuit protection.
This tool is wired at the factory for 110-120 Volt operation. It must be connected to a 110-120 Volt /
15 Ampere time delay fuse or circuit breaker. To avoid shock or fire, replace power cord immediately if it is
worn, cut or damaged in any way.
Before using your scroll saw, it is critical that you read and understand these safety rules. Failure to follow
these rules could result in serious injury to you or damage to the scroll saw.
WARNING
TABLE
Size............................................ 12-3/16 in. x 18-7/8 in.
Tilt.............................................. 45° Left ; Right
SAWDUST BLOWER................ Yes
WORK LIGHT............................ Yes
NET WIGHT............................... 46.4 LB (21 kg)
WARNING
– 3 –
English