Publicidad
Idiomas disponibles
Idiomas disponibles
9.1
REPLACE THE BLADE
WARNING
Use only approved replacement blades.
WARNING
Wear heavy gloves or wind cloth around the blade
when you touch the blade.
1.
Stop the machine.
2.
Make sure that the blade is fully stopped.
3.
Remove the safety key and battery pack.
4.
Turn the machine to its side.
5.
Use a piece of wood to prevent the movement of
the blade.
6.
Remove the mounting screw and spacer with a
wrench or socket.
7.
Remove the blade.
8.
Install the new blade. Make sure that the arrows
on the fan engage the holes in the blade.
9.
Put in the spacer and tighten the mounting screw.
Recommended tightening torque: 24-27 ft.lbs.
33-37 N.m.
9.2
STORE THE MACHINE
• Remove the safety key.
• Remove the battery pack(s).
• Clean the machine before storage.
• Make sure the motor is not hot when you store the
machine.
• Make sure that the machine does not have loose
or damaged parts. If it is necessary, follow these
instructions:
• Replace the damaged parts.
• Tighten the bolts.
• Speak to a person at an approved service center.
• Store the machine in a dry area.
English
NOTE
• Make sure that children cannot come near the
machine.
9.3
STAND THE MACHINE ON END
1.
Remove the grass catcher.
2.
Pull and turn the handle knobs 90°.
3.
Fold down the handle.
4.
Turn the handle knobs 90° to lock the handle into
position.
5.
Stand the machine on end and make sure that
the brackets touch the floor.
10
TROUBLESHOOTING
Problem
Possible cause Solution
The handle is
The bolts are
not in position.
not engaged
correctly.
The machine
The battery ca-
does not start.
pacity is low.
The bail switch
is defective.
The safety key
is not put in.
13
EN
Adjust the
height of the
handle and
make sure that
the knobs and
bolts are
aligned correct-
ly.
Charge the bat-
tery pack.
Replace the bail
switch.
Put in the safety
key.
Publicidad
