NGS Technology Quoll Manual De Usuario página 4

For USB Port Installation
It requires Windows 98 or later to install USB port. Connect the receiver cable to the USB
port on the computer. For Windows, you may be prompted to insert the Windows software
CD. Insert this software CD into the computer's CD-ROM driver when asked to do so. Then
follow the on-screen instructions.
Setting up your Cordless mouse
After you have installed the receiver, you are ready to place the mouse on your desk-
top. Because the mouse use radio frequency technology, placement of you mouse is not
critical, giving you considerable freedom of movement and a more enjoyable computing
experience.
For optimal performance, place the stand at least eight inches or 20 centimeters away
from the mouse or other electrical devices, such as the computer, the computer monitor,
or external drive.
Changing the security IDs
CAUTION: This is NOT a must do step in installation.
Your mouse comes with 256 security IDs, which can let your receiver only listen to one
mouse. Do following step to change security IDs when you get undesired interference from
another same mouse used nearby.
1. Press the CONNECT button on the Receiver.
2. Press the CONNECT button on the bottom of the Mouse ONCE.
If the mouse cursor does not move after 10 second, do above steps again.
CAUTION: If you had changed the security ID successfully, you need to do above steps to
re-connect the mouse and the receiver each time you replace batteries.
 
User's Manual
USB port installation
USB Connector