NGS Technology Quoll Manual De Usuario página 5

Troubleshooting
Try one or more of the following:
• For optimal performance, place the receiver at lease eight inches or 20 centimeters away
from the mouse or other electrical devices, such as the computer, the computer monitor,
or external drive.
• Make sure you have installed the batteries correctly.
• If you are working on a metallic surface, try using a mouse pad and turning the receiver
on its side for better reception.
• Press the CONNECT button on the receiver, then press the Connect button on the
mouse.
Mouse Not Detected
When using the mouse, it may not be detected by the computer, To remedy this problem,
try the following:
• Make sure the receiver cable is plugged intothe right mouse port.
• Makesure your mouse port has the proper configuration. Refer to your computer docu-
mentation for the correct port configuration.
• You may have other system devices(e.g. a LAN card) that conflict with your mouse.
Check the IRQ/address settings of these devices for conflicts, and change the settings as
required.
The Screen Cursors Does Not Move Properly
• Change the position of your radio receiver, because it may be too far from the mouse or
the computer monitor or a large metal object may be interfering with the receiver's radio
reception. Try moving the stand and/or mouse to improve reception.
User's Manual