HON END BOOK SHELF Instrucciones De Montaje página 2

Illustration 3
Minifix cam
Arrow
Right end
panel
Minifix cam
Right end
panel
Illustration 4A
Dowel
Illustration 4B
Dowel
Illustration 5
Bottom
edge
Minifix
bolt
2 OF 7
END BOOK SHELF
Fixed shelf
Minifix bolt
End panel
End panel
End
panel
End
panel
Shelf
3. Refer to Illustration 3. With arrows facing end panel,
install two minifix cams (from hardware pack) into holes
along side edge of shelf.
Use the Phillips screwdriver to tighten minifix cams.
Turn minifix cams clockwise to tighten.
Repeat Steps 2-3 for remaining shelves.
4. Refer to Illustration 4A for right handed units and 4B for
left handed units. (NOTE: Orientation of the holes.
Lay end panel, with holes up, on cardboard or a
carpeted surface.)
Use the rubber mallet to install ten dowels (from hard-
ware pack) onto end panel as shown.
Use the Phillips screwdriver to install ten minifix bolts
(from hardware pack) onto left end panel. Tighten each
minifix bolt until minifix bolt shoulder is flush against
RH
surface of end panel.
Minifix
bolt
LH
5. Refer to Illustration 5. Attach end panel made in Step 4
to end panel with the shelf assembly by inserting minifix
bolts, into holes drilled into sides of end panel with the
shelf assembly.
2420956500_E
www.hon.com