Instructions manual
Pole Assembly
Unscrew the screw in locking shaft at the bottom of
fan housing, insert upper extension pole to the
locking shaft with the right hole position。
Using the screws to screw the tube on the supportor
board.
Care and storage
1. Turn the control to OFF and UNPLUG THE FAN
BEFORE CLEANING.
2. Use only a soft damp cloth to clean the fan.
3. DO NOT immerse the fan in water and never
allow water to drip into the motor housing.
4. Do not use gasoline, paint thinner or other
chemicals to clean the fan.
5. Store the fan in its original box or cover the fan to
protect it from dust.
Store it in a cool dry place.
Correct disposal of this product
• This marking indicates that this product should not
be disposed with other household wastes
throughout the EU.
• To prevent possible harm to the environment or
human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable
reuse of material resources.
• To return your used device, please use the return
and collection systems or contact the retailer where
the product was purchased. They can take this
product for environmental safe recycling.
• The symbol on the product means
that at the end of its life, the appliance
must not be considered normal waste
but hazardous waste and, as such,
must be disposed of in specific recovery and
disposal areas, as prescribed by the EC Directive
2012/19/EU (WEEE). By disposing of this product
correctly, you can prevent negative consequences
for the environment and for human health, due to
the presence of potentially hazardous substances
in the product.
Compañía Pineda Álvarez S.L.
CIF: B41690223
Address: P.I. Sta Isabel c/Alicatadores, 23
Spain
+34 955 741 038
+34 615 264 338
Fax. +34 955 741 25
4
English