6. Reminder Function:
This function will help to remind you to start cooking in a certain time from 0:01 to 9:59. Only
when oven in standby state, the reminder can be set. Follow below to set the reminder:
1> Press reminder setting button "
2> Rotate " K2 " to set the hour time of reminder. (Time should be within 0--9).
3> Press reminder setting button "
4> Rotate "K2 " to set minute time of reminder. (Time should be within 0--59).
5> Press "
" to confirm setting. The time will count down.
Note: The oven buzzer will sound for 10 times after the time back to the zero hour.
You can cancel the reminder during setting by pressing the stop button; After the reminder has been
set, you can cancel it by pressing stop button twice.
7. Start/Pause/Cancel Function
1> If the cooking time has been set, press "
to resume cooking.
2> During cooking process, press "
cooking.
8. Energy-Saving Function
1> In waiting state and reminding state , press "
off and set to energy-saving mode.
2> If no operation in10 minutes under waiting state, the LED display will go off and go into energy-saving
mode.
3> Under the energy-saving mode, press any key or rotate any knob can quit the energy-saving mode.
9. Pyrolytic Function
This function allows you to clean thoroughly the oven cavity.
1>Rotate "K1" to select the pyrolytic function. LED will display "PYA".
2>Press "
" to confirm the cooking. And the default time is 2 hours, "PYA" will display on the LED.
3>Rotate "K1" to change the pyrolytic time. There have two levers time can be selected"1:30 or 2:00".
Note:
A) When the oven door was not closed, pressing start button will be invalid. The LED will display "DOOR"
and "PYA".
B)
When the oven's center temperature is highter than 320
LED will display "COOL" and "PYA". When the oven's center temperature is lower than 200°C, press
cancel button once , it will pause; press again, it will return to waiting state. If highter than 200°C,
press cancel button once, it will return to waiting state directly.
";
" again;
" to start cooking. If the cooking is paused, press "
" once to pause the cooking. Press "
" for three seconds, the LED display will go
C, pressing start button will be invalid. The
O
21
"
" twice to cancel the
V.1
.