Publicidad
Idiomas disponibles
Idiomas disponibles
Cutting with 5 measures
You can use the machine to cut without a comb or you can use one of the 4 combs with sizes 1.5, 3, 4.5 and 6 mm.
To adjust the hair size, just select the right comb.
1,5 mm
3 mm
Adjustment of blades and combs
To adjust the blade:
· To adjust the blade,
move the lever from front
to back.
8
4,5 mm
6 mm
For mounting the combs:
· Align the edge of the
comb with the edge
of the blade and push
forward slightly to
assemble.
To dismantle the combs:
· Simply pull the comb
tightly.
Removal and installation
of the blades
In the drawing you will see that the lower
blade holes are larger than the shanks
of the blade screws. Loosen the screws,
align the lower blade with the upper
blade and tighten the screws firmly.
(1) The end of the upper blade teeth
should be 0.5 to 1 mm behind the lower
blade. This is important so that the razor
does not cut too close or allow the
moving blade to touch the skin.
(2) The left end tooth of the upper blade
must cover or be to the left of the first
small tooth of the lower blade.
(3) The right end tooth of the upper
blade must touch the large tooth of the
lower blade.
9
Publicidad
