Publicidad
Idiomas disponibles
Idiomas disponibles
Installation Instructions
Electrical Connections (cont.)
The manufacturer's warranty does not cover any damage or defect caused by installation, attachment or use of
any type of energy-saving or other unapproved devices (other than those authorized by the manufacturer) into,
onto or in conjunction with the water heater. The use of unauthorized energy-saving devices may shorten the life
of the water heater and may endanger life and property.
The manufacturer disclaims any responsibility for such loss or injury resulting from the use of such unauthorized
devices.
If local codes require external application of insulation blanket kits, the manufacturer's instructions included with
the kit must be carefully followed.
Application of any external insulation, blankets or water pipe insulation to this water heater will require
careful attention to the following:
• Do not cover the temperature and pressure-relief valve.
• Do not cover access panels to the heating elements.
• Do not cover the electrical junction box of the water heater.
• Do not cover the operating or warning labels attached to the water heater or attempt to relocate them on the
exterior of the insulation blanket.
BRANCH CIRCUIT SIZING GUIDE
Total Water
Recommended Over Current Protection (fuse
Heater Wattage
1500*
1700
2000
2500
3000
3500
3800
4000
4500
5000
5500
6000
9000
*Less than 1500 Watts may be wired 14 gauge with 15 amp protection. Check local electrical codes, as they will
also apply.
NOTE: This guide recommends minimum branch circuit sizing based on the National Electric Code. Refer to
49-6000248 Rev. 1
or circuit breaker amperage rating)
120V
208V
20
15
20
15
25
15
30
15
35
20
-
25
-
25
-
25
-
30
-
30
-
25
-
40
-
Copper Wire Size AWG Basedon N.E.C.
Table 310-16 (167°F/75°C.)
240V
120V
15
12
15
12
15
10
15
10
20
8
20
-
20
-
25
-
25
-
30
-
30
-
35
-
50
-
208V
240V
14
14
14
14
14
14
14
14
12
12
10
12
10
12
10
10
10
10
10
10
8
10
8
8
-
8
15
Publicidad
