Sime Format.zip 25 Solar Manual De Instrucciones página 81

TABLE 2
Siting of terminal
A - below openable window
B - below ventilation opening
C - below eaves
D - below balcony (1)
E - from adjacent window
F - from adjacent ventilation opening
G - from horizontal or vertical soil or drain pipes (2)
H - from corner of building
I - from recess in building
L - from ground level or other treadable surface
M- between two terminals set vertically
N - between two terminals set horizontally
O - from a surface facing without openings or terminals
P - as above but with openings and terminals
1) Terminals below a practicable balcony must be located in such a way that the total path of the smoke from its outlet
point from the terminal to its outlet point from the external perimeter of the balcony, including the height of possible
railings, is not less than 2000 mm.
2) When siting terminals, where materials that may be subject to the action of the combustion products are present
in the vicinity, e.g., eaves, gutters and downspouts painted or made of plastic material, projecting timberwork, etc.,
distances of not less than 1500 mm must be adopted, unless adequate shielding is provided to guard these mate-
rials.
cod. 8089501
Fig. 11
Appliances from 7 to 35 kW
2. 1 1 POSITIONING OF OUTLET
TERMINALS
The outlet terminals for forced draught
systems may be located on the outer walls
of the building. Table 2 shows approximate,
non-binding minimum distances to be met
for a building of the type shown in fig. 12.
2. 1 2 ELECTRICAL WIRING
If you must replace the electric power
cable supplied with the boiler, order it exclu-
sively from Sime.
The power supply must be single-phase
230V - 50 Hz through a main switch pro-
tected by a fuse with a distance of at least
3 mm between contacts.
(distances in mm)
600
600
300
300
400
600
300
300
300
2500
1500
1000
2000
3000
IT
ES
PT
GB
Fig. 12
81