Descargar Imprimir esta página

gsc evolution 200205053 Manual De Instrucciones página 21

Publicidad

Idiomas disponibles

Idiomas disponibles

POSIBLES PROBLEMAS Y SOLUCIONES / POSSIBLE PROBLEMS AND SOLUTIONS /
PROBLÈMES POSSIBLES ET SOLUTIONS / POSSÍVEIS PROBLEMAS E SOLUÇÕES
La carga no funciona
Problemas con la sen-
sibilidad
El sensor no se apaga
automáticamente
The load does not
work
The sensitivity is poor
The sensor can not
shut off the load auto-
matically
Comprobar si la conexión de la fuente de alimentación es correcta.
Comprobar si la carga y la potencia es correcta.
Comprobar si los ajustes de la luz corresponden a la luz ambiental.
Comprobar si hay algún obstáculo delante del detector que afecte a la señal.
Comprobar si la temperatura ambiente es muy alta.
Comprobar si la fuente de movimiento está en el campo de detección.
Comprobar si la altura de instalación corresponde a la altura requerida en las ins-
trucciones.
Comprobar si la orientación de movimiento es correcta.
Comprobar si hay movimiento continuo en el campo de detección.
Comprobar si el retardo está ajustado a la posición máxima.
Comprobar si la potencia corresponde a las instrucciones.
Please check if the connection of power source and load is correct.
Please check if the load is good.
Please check if the settings of working light correspond to ambient light.
Please check if there is any hindrance in front of the detector to affect it to receive
the signals.
Please check if the ambient temperature is very high.
Please check if the induction signal source is in the detection field.
Please check if the installation height corresponds to the height required in the ins-
truction.
Please check if the movement orientation is correct.
Please check if there is continual signal in the detection field.
Please check if the time delay is set to the maximum position.
Please check if the power corresponds to the instruction.

Publicidad

loading

Este manual también es adecuado para:

200205054200205055200205056