Sony UPX-C21 Manual De Instrucciones página 50

Operation
50
To laminate a printout
If you are using a UPC-2045 self-laminating color-printing pack, you can
laminate the printout. The lamination type can be selected from among
glossy, mat or textured.
1
Press the MENU button on the station.
"LAMINATION:" appears on the LCD of the station.
2
Press the b or B button to select the lamination type, GLOSSY,
MATTE or TEXTURE.
3
Press the EXEC button.
The selected lamination type is set, and the set type is displayed at the
left top on the LCD like "LG.".
When you press the PRINT button, printing begins, and a laminated
printout is output.
When the Self-Laminating Color Printing Pack UPC-2040A is
used
The thermal head of the printer needs to be preheated to start printing.
When, for example, printing immediately after turning on the printer, the
PRINT lamp of the printer lights during preheating, then printing starts
automatically when the printer is ready.
Notes
When storing your printouts:
• Avoid storing the printout in a location subject to high temperatures, high
humidity, excessive dust and direct sunlight.
• Do not stick tape on a printout. Also, avoid leaving a plastic eraser on a
printout or placing a printout in contact with materials which contain
plasticizer (under a desk mat, for example).
• Do not allow alcohol or other volatile organic solvents to come into
contact with the printouts.
To turn the station and printer off
Disconnect the AC power adaptor from wall outlet, and press the POWER
switch to turn the printer OFF.