Publicidad
Handle
Spindle
lock
Hook and loop
backing disc
Auxiliary handle assembly
• Align the auxiliary handle with the polisher head and
match the screw orifices.
• Screw firmly the auxiliary handle to the polisher head
using the included screws.
Disc Assembly
• Adhere the bonnet to the Hook and loop backing disc.
• Press the spindle lock (A) and mount the disc into the
polisher head. Screw it tight.
• To remove the disc, press the spindle lock and unscrew
the disc.
CAUTION
• The spindle lock can only be
tightened when mounting or dismounting the disc. It shall
never be pressed to stop the disc while polishing.
Otherwise the tool may get damaged and exposes you to
personal injury.
Parts
Speed
control
Polishing
bonnet
M14x2
Speed
table
Auxiliary
handle
Trigger
switch
Carbon brush
housing cap (x2)
Assembly
Orifices to screw on
the auxiliary handle.
Spindle
lock
Polishing
Hook and loop
bonnet
backing disc
Handle
Power cord
protector
Continuous
use button
Power
supply cable
A
ENGLISH
7
Publicidad
