Shop-Vac SL Serie Manual Del Usuario página 11

FIGURE 12
18. To remove the filter for
cleaning, again hold the tank
cover and turn the filter retainer
counter-clockwise to loosen
and remove. (FIGURE 13)
FIGURE 13
19. Slide the cartridge filter off the
lid cage. (FIGURE 14)
FIGURE 14
20. To clean the cartridge filter
shake or brush off excess dirt.
(FIGURE 15)
FIGURE 15
21. Or rinse (from inside of the
filter) with water. (FIGURE 16).
Dry completely (approximately
24 hours)
FIGURE 16
22. Check the filter for tears or
small holes. If none are found,
reinstall the filter. To prevent
damage to your vacuum, do
not use a filter with a hole or a
tear.
WARNING!
KEEP FILTERS CLEAN.
EFFICIENCY OF THE VACUUM
IS LARGELY DEPENDENT ON
THE FILTER. A CLOGGED FILTER
CAN CAUSE OVERHEATING
AND POSSIBLY DAMAGE THE
CLEANER. CHECK THE FILTER
PERIODICALLY AND REPLACE
AS REQUIRED.
10 Eng.