Publicidad
Idiomas disponibles
Idiomas disponibles
UNIFIX 20S / 50S
Unifix 20 S and 50 S are designed to withstand winds of 100 Km/h at all time and up to 130 Km/h
occasionaly.
PANEL COMPATABILITY
With the design based on the use of Oblong drilling, Unifix can be used with different kind of panels on the
market.
Unifix 20S and50S are meant to fix 1 panel only, with the spacings and dimensions of panels as indicated
below.
120 mm
RECOMMENDATIONS
Mount Unifix brackets only on surfaces with sufficient bearing capacity. Consider the additional load with
the panel:
Support
Unifix 20S = 1,6 kg
Unifix 50S
=3,0kg
Fastening: to prevent large quantities of snow from accumulating behind the sensor, install appropriate
barrier grids.
The position of the solar panel influences your electrical production. Choose the most optimal inclination
and orientation to suit your environment. Avoid shaded areas or objects that are a source of shadow (eg
tree)
Before attaching and connecting, please observe:
•
the maximum distances between each element shown below.
•
connecting order
SAFETY INSTRUCTIONS
•
Take the appropriate mesures to prevent accidents during your mounting steps.
•
If the bracket and the mounting tools are exposed to sunlight for a long period, there is a risk
of getting burnt. Make sure to protect yourself accordingly.
•
When finished, check and ensure that all of your brackets and panels are fixed properly.
Unisun 10.12M / 10.24M / 20.12M / 20.24M
Unisun 30.12M / 50.12M / 55.12BC
www.uniteck.fr
20S : 260 mm
50S : 500 mm
Panel
=1.3kg / 1,3kg / 2.kg / 2.kg
=3,1kg / 4,1kg / 3,8kg
EN
7
Publicidad
