Dupray bloom Manual De Instrucciones página 17

EN
5
Replace the cover, insert the new filter, and lock it in place by turning clockwise.
To reset the filter change alert
Once the filter has been replaced, reset the alert. Access the FILTER mode by
tapping the control button once when on HIGH FAN SPEED mode.
To reset the alert, press the button for 5 seconds. While pressing, the filter light
will blink, then go OFF and the mode will change to AUTO, indicating the alert has
been successfully reset.
17
Note : The filter mode is only available when the filter change indicator is ON.
5 sec
When on filter mode, the red
LED will stop blinking.
Filter change alert
is now reset.