Dupray bloom Manual De Instrucciones página 9

EN
Install the corresponding plug on the
3
universal power adaptor
Bloom™ comes with a universal power adaptor and a set of 3 different plugs.
Select the one that corresponds to your area and install it on the power adaptor.
To install, insert the plug and
turn clockwise.
The usage of the standard North American power plug in the illustrations above is for explanation
purpose only. You must install the one that corresponds to your country's electrical installation.
Turn it ON
4
Connect the power cable
at the back of the Bloom™
then plug it into an electrical
outlet.
9
Click
You should hear a clicking
sound when it's properly
in place.
Turn the power switch,
located at the back, to ON.
The lights may flash for a brief moment as the system is running a self-test.
To remove, press and hold the
release button and turn the
plug counterclockwise.
The AUTO mode and air quality
indicators will illuminate on
the control button.