Operating Determinations - Mark NC 1000 Manual De Uso

The device has left our premises in absolutely perfect condition. In order to maintain this condition and
to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and
warning notes written in this user manual.
Important:
Damages caused by the disregard of this user manual are not subject to warranty . The
dealer will not accept liability for any resulting defects or problems .
Always plug in the power plug least. The power-plug has to be accessable after installing the device .
Keep away from heaters and other heating sources .
If the device has been exposed to drastic temperature fluctuation (e .g. After transportation), do
not switch it on inmediately. The arising condensation water might damage your device . Leave
the device switched off until it has reached rooom temperature .
Never put any liquids on the device or close to it. Should any liquid enter the device nervertheless,
disconnect from mains inmediately . Please let the device be check ed by qualified service
technician before you operate it again . Any damages caused by liquids having entered the
device are not subject to warranty.
This device falls under protection-class I. Therefore it is essential that the yellow/green conductor
gets connected to earth . The electric connection must be carried out by a qualified employee
Never let the power-cord come into contact with other cables . Handle the power-cord and all
connections with the mains with particular caution .
Make sure that the power-cord is never crimped or damaged by sharp edge . Check the device
and the power-cord from time to time .
If the power-cord of this device will be damaged , it must be replaced by an authorized dealer
or by a qualified electrician in order to avoid any danger .
Always disconnect from the mains, when the device is not use or before cleaning it. Only handle
the power-cord by the plug. Never pull out the plug by tugging the power -cord.
Please note that damages caused by manual modifications on the device or unauthorized
operation by unqualified persons are not subject to warranty.
Keep away children and amateurs .
There are no serviceable parts inside the device. Maintenance and service operations are only
to be carried out by authorized dealers.

OPERATING DETERMINATIONS

This device is a switching panel for switching other devices like lighting effects or spots in
discotheques, on stages, etc. This product is allowed to be operated with an alternating current
of 115-230 V, 50-60 Hz and was designed for indoor use only.
Do not shake the device. Avoid brute force when installing or operating the device .
NC 1000 User Manual - Manual de Uso
EN
.
Pag. 2