Mark NC 1000 Manual De Uso página 4

EN
You can install the device at any desired place in dr y rooms. Please make sure that the device
is not exposed to extreme heat, moisture or dust. There should not be any cables lying around.
You endanger your own and the safety of others.
Do not operate the device in extremely hot (more 30º C) or extremely cold (less than 5º C).
Keep away from direct insulation and heaters .
Operate the device only after having familiarized with its functions. Do not permit operation by
persons not qualified for operating the device . Most damages are the result of unprofessional
operation.
Never use solvents or aggresive detergents in order to clean the device. Rather use a soft
and damp cloth .
Please use the original packing if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidd en due to safety reasons.
If the device will be operated in any way different to the one described in this manual the
product may suffer damages and the guarantee becomes void
operation may lead dangers like short-circuit, burns, electric shock, etc
CONNECTIONS
Main input
Plug the power-plug into a safety socet.
The occupation of the power-cord (3 x 1.5 mm) is as follows.
Brown
Blue
Green/Yellow
The earth has to be connected .
OPERATION
After you connected the device to the mains , the switching board is ready for use. You
can switch the desired channel on and off via the swtiches on the front panel .
live (L)
neutral (N)
earth (E)
NC 1000 User Manual - Manual de Uso
. Furthermore, any other
Pag. 3