Cleaning And Maintenance - Mark NC 1000 Manual De Uso

EN

CLEANING AND MAINTENANCE

CAUTION
Disconnect from mains before starting maintenance operation
We recommended a frequent cleaning of the device . Please use a soft lint-free and
moistuned cloth.Never use alcohol or solvents.
There are no serviciable parts inside the device except for the fuse . Maintenance and
service operations are only to be carried out by authorized dealers .
Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating .
Please note: This fuse is being used for both 115 V and 230 V .
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Unscrew the fuseholder on the front panel with a fitting screwdriver from the housing
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a
special power supply cable available at your dealer .
Should you have further questions, please contact your dealer .
NC 1000 User Manual - Manual de Uso Pag. 4