Festool RSC 18 Manual De Instrucciones Original página 16

English
Keep the handle dry, clean and free of oil
–
and grease. Never cut into unknown mate­
rials and keep the cutting line above and
below the workpiece free from obstacles.
If the saw blade hits an object, kickback can
occur on the power tool.
Keep your hands away from the sawing
–
area. Do not reach under the workpiece.
There is a risk of injury in the event of con­
tact with the saw blade.
Keep your working area clean. Material
–
mixtures are particularly dangerous. Light
metal dust may burn or explode.
Improve the blood circulation in your fin­
–
gers by relaxing your hands and exercis­
ing your fingers in the breaks between
working. Vibrations during long periods of
work can result in blood vessel disorders
and disorders of the nervous system in fin­
gers, hands and wrists.
Harmful/poisonous dust may be produced
–
when working (e.g. paint products con­
taining lead and some types of wood).
Contact with or inhalation of this dust may
pose a risk for the operating personnel or
persons in the vicinity. Comply with the
safety regulations that apply in your coun­
try. Connect the power tool to a suitable
dust extractor.
Do not use power supply units or third-
–
party battery packs to operate cordless
power tools. Do not use third-party charg­
ers to charge the battery packs. The use of
accessories not expressly authorised by the
manufacturer can result in electric shocks
and/or serious accidents.
–
Wear suitable personal protective equip­
ment: Ear protection, protective goggles,
dust mask for work that generates dust,
protective gloves for changing tools.
Only for AS/NZS: The tool shall always be
–
supplied via residual current device with a
rated residual current of 30 mA or less.
2.4 Emission levels
The levels determined in accordance
with EN 62841 are typically:
Sound pressure level
Sound power level
Uncertainty
16
Noise generated when working
Risk of damage to hearing
► Use ear protection.
Vibration emission level a
three directions) and uncertainty K measured in
accordance with EN 62841:
Sawing chipboard / wooden
beams
The specified emission levels (vibration, noise)
–
–
–
The emission values may deviate from the
specified values. This is dependent on how
the tool is used and the type of workpiece
being machined.
► The actual load during the entire operating
► Depending on the actual load, suitable pro­
3
The cordless reciprocating saw is designed to
saw wood, plastic, metal and construction ma­
terials. It is suited to straight and curved cuts.
Flush-mounted separation is possible if corre­
sponding suitable bimetal saw blades are used.
Materials containing asbestos must NOT be
processed.
–
4
Cordless reciprocating saw
Motor voltage
L = 87 dB(A)
PA
Stroke rate
L = 98 dB(A)
WA
Stroke length
K = 5 dB
CAUTION
are used to compare machines.
They are also used for making preliminary
estimates regarding vibration and noise
load during operation.
They represent the primary applications of
the power tool.
CAUTION
cycle must be evaluated.
tective measures must be defined in order
to protect the operator.
Intended use
intended for use with BP Festool battery
packs of the same voltage class.
The user is liable for improper or non-in­
tended use.
Technical data
(vector sum for
h
a = 11 m/s 2
h
K = 3 m/s 2
RSC 18
18 V
0–3000 rpm
32 mm