Goalzero SHERPA 100PD Guia Del Usuario página 6

USING THE SHERPA
BUTTONS:
TIPS for LAPTOP CHARGING via USB-C PD:
We recommend using a USB-C to USB-C cable when recharging enabled
laptops. Since USB-C PD ports are bidirectional, meaning they can
function as an input to charge the Sherpa or an output to charge other
devices, plugging in a laptop may cause the Sherpa to try charging from
the laptop's internal battery, rather than charging the laptop. To fix this,
slide the selector switch on the back of the Sherpa to "OUTPUT"
PASSTHROUGH CHARGING
The Sherpa can be charged and recharge other devices simultaneously. Keep
in mind that if you are outputting more power than you are inputting you will
drain the Sherpa battery and the device will turn off. Plug the Sherpa into a
power source and make sure it is still powered on, then plug the phone/laptop/
tablet or other device into the Sherpa.
4
Turn on/off the display.
Turn on/off wireless charging. Button light
is white when wireless charging is turned on
and turns green when connection with the
device is made and charging begins. Place your
smartphone on top of the device on the black
charging square to begin charging.
Turn on/off the USB-A ports.
Slide switch on the back of the Sherpa to change
your USB-C ports between Input/Auto/Output.
Input means you are inputting power to your
Sherpa. Output means you are outputting power
from your Sherpa.