Descargar Imprimir esta página

VITO PRO-POWER VIBCLOSFL20 Manual De Instrucciones página 27

Idiomas disponibles

FREQUENTLY ASKED QUESTIONS / TROUBLESHOOTING

Question/Problem - Cause

The orbital sander doesn't switch on when you press

the" on/off" switch:

• Discharged battery;

• Switch connections are not in good condition or

switch does not work;

Engine emits abnormal sound, starts intermittently

or rotates slowly:

• Switch connections damaged;

• Mechanical obstruction;

• The sander is under excessive pressure, engine

overloaded;

• ;

Body overheats:

• Machine overloaded;

• The housing or parts inside the orbital sander are

incorrectly assembled;

Solution

• Charge the battery;

• Repair or replace the switch;

• Inspect the mechanical components;

• Reduce the pressure;

• Reduce working pressure;

• Check whether there is any blockage;