Sony SU-W200 Manual De Instrucciones página 6

Step 4: Attach bracket B to the TV
Before attaching bracket B, disconnect the AC power adaptor and all the
cables from the TV.
For how to remove the rear cover of the TV, refer to the Operating Instructions
supplied with the TV.
Remove the four screws as illustrated below, and detach
1
the TV stand from the TV.
To prevent damaging the surface of the LCD display, place the TV on a
soft mat.
Notes
• Place the TV body only on the table as illustrated above. If the TV stand is also on
the table level to the TV body, the TV body may become unstable and cause
damage.
• When removing the TV stand, hold it firmly.
Secure bracket B to the TV firmly using the four screws
2
removed in step 1.
Rear of the TV
6
Rear of the TV
Soft mat
Remove these screws.
TV stand
Bracket B