Publicidad
Idiomas disponibles
Idiomas disponibles
Errorwriting
Description
Overview
If malfunctions occur during operation, please refer to the following table. If the problems cannot be
solved as described under Remedy, please contact your wholesaler.
Problem
Possible cause
Product launches
do not to the power supply
Not
Connected
Power cable or plug defective
other electrical defect of the
Product
Error occurred
Remote control faulty
Remote control
Batteries exhausted
does not work
product out of range or
Signals interrupted by obstacle
other electrical defect of the
Remote control
Timer
implausible, conflicting or
does not work
Incorrect time set
Insufficient
nearby heat source obstructed
Cooling
the cooling process
Insufficient ventilation
open windows or doors in the room
Exhaust air hose not properly
connected or clogged
Air filter clogged
Temperature set too high
Unusual
Product is not leveled
Noises
Product touches item
Note
During operation, a "luck" of water can be heard. This noise is normal for refrigerant,
circulating in the refrigerant circuit.
page 18
Remedy
Connect to the power supply
have a professional check
have a professional check
see protection and error codes
see below
Replacing batteries
remote control and
Removing obstacles
have a professional check
Check the time setting
Reposition the product or
Eliminate heat source
Ensure ambient distance
Close windows / doors
properly connect or
Eliminate constipation
Clean air filters
Setting temperature control
Leveling the product
Remove item
Publicidad
