Publicidad
Idiomas disponibles
Idiomas disponibles
drink container.
∙ T urn the container upside down and fit it
to the motor housing in such a way that
the two triangle symbols are aligned.
Now lock the container by turning it
clockwise.
∙ Insert the plug into a suitable outlet
and use the rotary control to select
the desired speed setting or the pulse
function (P).
∙ Caution: Do not operate the appliance
when it is empty. Do not fill it with dry
items only, such as nuts, almonds etc.
∙ If some residue sticks to the drink
container's sidewalls, remove the
container, shake it and let it run through
another brief pulse cycle.
∙ Remove the plug from the wall socket
after use. Wait until the motor has come
to a complete standstill before removing
the container and unscrewing the blade
unit.
∙ Close the container with its lid.
Wind-up power cord storage
The power cord can be wound up for
storage on the underside of the unit.
Unwind it completely before operation.
Information for testing institutes:
The following recipe may be used:
Mix 400 g soaked carrots and 600 g water
for 3 minutes.
∙ Cleaning and care
the plug from the wall socket before
cleaning the appliance.
∙ To avoid the risk of electric shock, do not
clean the motor housing or the power
Always remove
cord with water and do not immerse
them in water. The motor housing may
be wiped with a slightly damp, lint-free
cloth.
∙ Do not use abrasives, harsh cleaning
solutions or hard brushes for cleaning.
∙ F or cleaning directly after use, fill the
blender jug (max 700 ml) or drink
container (max 400 ml) with warm water
and a little detergent. Let the appliance
run for a short period as described
in the section Operation. Afterwards,
rinse the blender jug or drink container
with its blade unit, the lids and stopper
with fresh water. All parts must me
thoroughly dried afterwards.
∙ The drink container and lids can also be
cleaned in a dishwasher. All other parts
are not dishwasher-safe.
∙ If necessary, the sealing gasket on
the blender jug lid can be removed for
cleaning. Before the appliance is used
again, the gasket must be replaced.
∙ If required, the blade unit for the blender
jar can be detached for cleaning: first
remove the collar under the jar by
turning it clockwise (see pic. B), and
lift out the blade unit (pic. C). Caution:
The blades are extremely sharp. The
gasket in the drink container cannot
be removed. Clean the blade unit with
a suitable brush. Wipe the gasket with
a moist cloth. To re-assemble, place
the blade unit on the gasket, fit the
collar and lock it by turning it counter-
clockwise all the way, observing the
markings on the collar).
15
Publicidad
