Publicidad
Idiomas disponibles
Idiomas disponibles
FAN OPERATION INSTRUCTIONS
WARNING! If the fan is not going to be used for more than 3 days,
make sure the switch is in the off position.
REMOTE CONTROL
The remote control uses radio technology. It is therefore essential that the antenna
of the receiver is not disturbed by a signal, try to isolate it to the maximum and pay
special attention not to bend the antenna cable.
The remote control generates more than one million codes, so it is almost
impossible for it to interfere with another remote control.
1
2
3
3
2
1
4
5
6
Pair your remote
When you connect your fan to the network for the first 30 seconds, a pairing
channel is opened.
To pair your fan, press and hold the power key for 5 seconds in the 30 second
period.
The fan responds with a long beep. To pair multiple fans with the same remote
control, repeat the operation with each fan. Your fan is now paired.
9
8
4
5
6
7
1) Switch On /Switch Off
2) Natural Wind
3) Speeds
4) Timer / WiFi (optional)
5) Light On / Light Off (optional)
6) Dimmer + / - (optional)
7) Selection of colors for the light
8) Bip On / Off
9) Temperature (optional)
9
10) Summer / Winter
Publicidad
