Publicidad
Idiomas disponibles
Idiomas disponibles
2
Feed the fan supply wires( from fan
motor housing) through the downrod,
Deco cover, canopy.
Fan supply wires
Canopy
Deco cover
Motor assembly
4
Hang the fan motor housing on the
mounting bracket, ensure the ball joint
locating the groove aligns with the
notch on the mounting bracket.
3
Attach the downrod to fan motor
housing by the follow method.
A. Remove the insert locking pin from
cross bolt and pull the cross bolt out.
B. Unscrew the fixing screws.
C. Push the downrod into top motor
cover and align the holes on the
downrod.
D. Insert the cross bolt back and lock it
with the locking pin.
E. Fasten the fixing screws.
Fixing screw
Notch
Locating groove
5
Cross bolt
Locking pin
Publicidad
