Commercial CHEF CHFP4MB Manual De Instrucciones página 7

INSTRUCTIONS FOR USE
10
Carefully remove blade from shaft.
HOW TO USE THE SHREDDING DISC
1
Align bowl and base. Turn bowl
clockwise to lock into place.
NOTE: Unit will not work unless
bowl is locked.
4
Align lid and bowl.
Turn lid clockwise to lock into
place.
NOTE: Unit will not work unless lid
is locked.
Caution:
Always use food pusher to feed food into the chute.
Never push food through chute with fingers or other objects.
11
Unlock bowl by turning counter-
clockwise and lift off motor clutch.
WARNING!
Hazard: Always unplug unit before
removing lid
2
Place Blade shaft in the middle of
the bowl.
5
Cut food to fit food chute.
Place food into the feeding chute.
Use pusher to move food into the
cutting disk.
12
3
A: Slide the desired cutter in the
inner edge of the cutting disc.
Place the cutter down until it locks
in place.
B: Then place the cutting disk onto
the shaft.
OFF
PULSE
6
Select ON, OFF/PULSE on control
panel.
ON: Processor will run continuously.
OFF/PULSE: For instant on and off
control.
ENGLISH
ON
Page 7