Introduction; Specifications; Warnings And Cautions; Warnings - Maytronics Dolphin PROX 2 Gyro Instrucciones De Manejo

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 33
EN
Dolphin PROX 2 Gyro Pool Cleaner
Operating Instructions

1. INTRODUCTION

Thank you for purchasing a Maytronics Robotic Pool Cleaner.
We are sure that your Maytronics Robotic Pool Cleaner will provide you with reliable, convenient and
cost effective pool cleaning. Its reliable filtration in all pool conditions and all-surface climbing brush
enhance maximum pool hygiene.
The Robotic Pool Cleaners by Maytronics deliver advanced cleaning technologys, long lasting
performance and easy maintenance.

2. SPECIFICATIONS

Motor protection: IP 68
Minimum depth: 0.80m/2.6ft
Maximum depth: 5m/16.4ft

3. WARNINGS AND CAUTIONS

3.1. Warnings

Use the originally supplied power supply only
Ensure the electrical outlet is protected by a ground fault interrupter (GFI) or an earth
leakage interrupter (ELI)
Keep the power supply out of standing water
CAUTION
Position the power supply at least 3m/10ft away from the edge of the pool
Do not enter the pool while the pool cleaner is working
Unplug the power supply before servicing

3.2. Cautions

When not in use store the Pool Cleaner on the Caddy in a shaded area.
Use the Pool Cleaner in the following water conditions only:
Chlorine
Max 4 ppm
pH
7.0 - 7.8
Temperature
6 – 34°C (43-93°F)
NaCl
Maximum = 5000 ppm
2
Dolphin PROX 2 Gyro Pool Cleaner | Operating Instructions

Publicidad

Tabla de contenido
loading

Tabla de contenido