3A HEALTH CARE ASPEED 3.0 Manual De Instrucciones página 14

Piston electric-compressor, with thermal protection
Suction class
Class of risk according to the 93/42/EEC directive
Fuse
Supply voltage
Adjustable vacuum level
Air flow
Dimensions
Weight
Noise level
Operation cycle
Operating conditions
Storage conditions
Operating-storage air pressure
Type BF device
Class II
Switch "OFF"
Switch "ON"
Alternating current
Do not use the unit when taking a bath or a shower
It is compulsory to carefully read the instructions before using this device
The device's casing is protected against solid particles having diameter of 12.5 mm or above,
IP21
vertically falling water drops and access to hazardous parts with a finger.
Single use
Sterilisation by ethyl oxide
3A HEALTH CARE S.r.l.
Via Marziale Cerutti, 90F/G
25017 Lonato del Garda (BS) - ITALY
Conforms to Directive 93/42/EEC for medical devices
TECHNICAL SPECIFICATIONS
1000 ml vessel
170 x 300 x 260(H) mm
2,3 Kg approx.
Temperature min. 10°C max 40°C – Humidity: min. 10% max 95%
Temperature min. -25° C max 70° C
SYMBOLS
14
Low flow, high vacuum
IIa
T1, 6A - 250V
230V ~ 50Hz 150VA
0 ÷ -0,65 bar (-65 kPa)
approx. 16 l/min.
170 x 300 x 360(H) mm
approx. 65 dBA
Continuous use
- Humidity: min. 10% max 95%
min. 690 hPa - max 1060 hPa
2000 ml vessel
2,5 Kg approx.