TRAPP TR 200 Manual De Instrucciones página 22

5 - Service
Call qualified professionals to service the equipment. Use original parts only. Always call TRAPP

Authorized Service Technicians. TRAPP is not responsible for occasional accidents caused by the use of
spare parts that are not original.
Additional Safety and Operation Instructions
Make sure the voltage of the power source is the

same of that of the equipment.
Carefully read instructions and get familiar with

the controls and proper used of the equipment.
Remember that the operator or user is responsible

for any accident or damage involving people or
their properties.
Avoid operating the equipment in humid places.

Use the equipment in a well ligth environment.

Before feeding any kind of foliage, start the motor

and wait for it to reach maximum revolution.
Do not introduce anything in the equipment with

the motor off.
Do not use the equipment during periods of

power supply failure.
Whenever cleaning or servicing, make sure the

motor is off
Then unplug the equipment.
If the equipment starts to vibrate, turn it off and

immediately unplug it. Check the cause of the
vibration as it indicates that the equipment
needs adjustment and repair.
Check the status of the power supply cord. Never

fix it with insulating tape.
Never use a water jet to clean the equipment; use

a cloth soaked in neutral detergent. Water inside
the equipment can damage the electric circuit
of the motor, besides increasing the risk of an
electric shock.
Do not allow people that are not familiarized

with the equipment to use it. The equipment
may become dangerous in the hands of people
not familiar with its operation.
22
and the blade is
Use the equipment according to the instructions

in this manual. Take in consideration the
working conditions and the service to be done.
Clean shredder periodically to avoid buildup of

residue.
Using the equipment for activities not covered in

this manual may result in dangerous situations.
The shredder TR 200G is equipped with a four-

cycle explosion motor - It does not use oil mixed
with the gasoline.
The engine leaves the factory without oil and

gasoline (TR 200G).
Spare parts - Always call TRAPP technicians for

spare parts and maintenance services.
Attention!
still.
Frequently check if all screws are well
tightened. Always keep the blades adjusted
to assure the good performance of the
shredder.
Attention!
Whenever cleaning or servicing, make
sure the equipment is off and the blades
are still as they continue to move for some
seconds.
www.trapp.com.br