Publicidad
Idiomas disponibles
Idiomas disponibles
Fig. 6
Shipping
Packaging
Plastic
Tie
Fig. 7
2. Prepare the Cabinet
Fig. 8
Plastic Frame
Window
Accordion
Fig. 9
Side Retainer
TOP VIEW
Fig. 10
User Manual
I.
Add two foam inserts to holes in top of cabinet where shipping
screws were removed from (see Fig. 6).
J.
Your unit may come with internal packaging. This packaging
must be removed prior to installing the air conditioner back
into the cabinet. (see Fig. 7).
A. Place cabinet on fl oor, a bench, or a table.
B. Attach foam gasket to top rail above holes as shown in Fig. 6.
C. Install top rail and side retainers to cabinet as shown in Fig. 8
(10 screws).
D. Slide 1 section of window accordion panel into side retainer on
the side of the cabinet (see Fig. 9 & Fig. 10). Do both sides.
Panel
E.
Insert top and bottom legs of window accordion panel frame
into channel in the top rail and bottom rail. Do both sides.
Plastic
Air Conditioner
Frame
Cabinet
Locking
Screw
"I" Section
Window
Hole
Accordion Panel
F.
Insert washer head locking 7/16" screws (2) into
holes in top leg of accordion panel frame (see
step 6). Do not completely tighten.
Allow leg to slide freely. Screws will be
tightened after section 6.
Page 15
Publicidad
