SOLAC PV1652 Manual Del Usuario página 8

ENGLISH
TRAVEL IRON
PV1652
DESCRIPTION
A Steam blast button
B Filling spout
C Soleplate
D Pilot light
E Dual voltage selector
F Steam regulator
G Temperature regulator
H Foldable handle button
USE AND CARE:
• Fully unroll the appliance's power cable
before each use.
• Use the appliance handle, to catch it or
move it.
• To keep the non-stick treatment in good
condition, do not use metal or pointed
utensils on it.
• Respect the MAX level indicator. (Fig.1).
• Disconnect the appliance from the mains
when not in use and before undertaking
any cleaning task.
• This appliance is for household use only,
not professional, industrial use.
• Store this appliance out of reach of chil-
dren and/or persons with physical, senso-
ry or reduced mental or lack of experience
and knowledge.
• Do not store or transport the appliance if it
is still hot.
• Keeping the iron in its housing support at
maximum temperature for too long time,
may cause its colour change, which will
not affect the correct working order of the
appliance.
• For a correct operation, keep the soleplate
in proper conditions does not operate over
metal objects (ironing board metal parts,
buttons, zips etc.).
• It is advisable to use distilled water, es-
pecially if the water in your area contains
clay or if it is "hard" (containing lime or
magnesium).
• Check that the lid is closed properly be-
fore starting the appliance.
• Never leave the appliance connected
and unattended if is not in use. This
saves energy and prolongs the life of the
appliance.
• Never rest the appliance into a surface
while in use.
• Do not use the appliance on any part of
the body of a person or animal.
• Do not use the appliance with pets or
animals.
• Turn the thermostat control to the mini-
mum (MIN) setting. This does not mean
that the iron is switched off permanently.
INSTRUCTIONS FOR USE
BEFORE USE:
• Remove the appliance's protective film.
• Ensure that the selected tension on the
voltage selector coincides with the tension
of the mains.
• To eliminate the smell given off by the
appliance when used for the first time, it is
recommended to have it on at full power
for 2 hours in a well-ventilated room.
• Prepare the appliance according to the
function you wish to use.
VOLTAGE SELECTOR:
• The appliance has a voltage selector
control, situate the selector according to
the type of voltage available in the mains
where the appliance is to be connected.
(Fig.2).
FILLING WITH WATER:
• It is essential to have filled the deposit
with water to be able to work with steam.
• Open water inlet lid.
• Fill the deposit taking care to observe the
EN