SOLAC PV1652 Manual Del Usuario página 9

MAX level (Fig.1).
• Close water inlet lid.
USE:
• Unroll the cable completely before plug-
ging it in.
• Connect the appliance to the mains.
• Slide the thermostat control to the desired
temperature position.
• The pilot light (D) comes on.
• Do not use temperatures higher than
those indicated on the garments to be
treated.
- ● Temperature for synthetic fibres (Poly-
ester, Nylon...).
- ●● Temperature for silk and wool.
- ●●● Temperature for cotton. (Minimum
temperature for steam ironing)
- Max Temperature for linen.
• If garment has various kinds of fibres,
select the temperature for the fibre that
requires the lowest temperature. (For
example, select the temperature for
polyester for an article made out of 60%
polyester and 40% cotton).
• Wait until the pilot light has gone out
which will indicate that the appliance has
reached an adequate temperature.
• During the appliance's use the pilot light
will come on and off automatically, indi-
cating the heating elements are working,
and therefore maintaining the desired
temperature.
DRY IRONING:
• The appliance has an option to dry ironing
(without steam). To use this option turns
on only the iron switch.
STEAM IRONING:
• It is possible to iron with steam whenever
the deposit is filled with water and the
adequate temperature is selected.
FORDABLE HANDLE:
• By pressing the button (H) the handle is
folded for an easy storage.
STEAM BLAST:
• This function proportions extra steam for
eliminating wrinkles.
• Press the steam blast button (A). Wait a
few seconds until vapour penetrates the
fibres of the garment before pushing the
button again. For optimum steam quality,
do not apply more than three successive
blasts.
• The steam blast button has to be pressed
repeatedly to release the first shot.
VERTICAL STEAMING:
• It is possible to iron hanging curtains,
items of clothing on his hanger, etc. To do
so, follow the instructions:
• Select the maximum temperature of the
iron, while turning the temperature regula-
tor of the iron in a clockwise direction.
• Move the iron in a top to bottom direction
while pressing the steam control (A).
Important: for cotton and linen, it's rec-
ommended to put the iron base in contact
with the material. For other more delicate
fibres, it's recommended to keep the iron
base at some centimetres of distance.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
• Select the minimum position (MIN) using
the thermostat control.
• Unplug the appliance from the mains.
• Remove the water from the inside of the
appliance.
• Clean the appliance.
PRACTICAL RECOMMENDATIONS:
• Classify the garments into groups by iron-
ing temperature. The appliance heats up
more quickly than it cools down, therefore,
EN