Descargar Imprimir esta página

Mattel Flying Ghast Instrucciones página 4

Publicidad

FLYING CORRECTLY: TRIM CONTROLS
Before you start flying your Ghast, it is recommended that you check if any trim adjustments are required to keep it flying correctly. Slowly
push the throttle joystick up until Ghast is off the ground. If it is drifting in various directions, you can fine-tune your Ghast by adjusting the
4 TRIM CONTROLS:
FORWARD/BACKWARD TRIM
If the Ghast drifts forward or backward when the steering joystick is not
pushed, press the DOWN trim button until it stops drifting forward or
press the UP trim button until it stops drifting backward.
SIDEWAYS TRIM
If the Ghast drifts left or right when the steering joystick is not pushed,
press the RIGHT trim button until it stops drifting left or press the LEFT
trim button until it stops drifting right.
THROTTLE TRIM
Push the DOWN throttle trim button to decrease the throttle power and
push the UP throttle trim button to increase the power.
SPIN TRIM
If the Ghast spins left or right when the throttle joystick is not pushed
towards the sides, press the spin trim button that is opposite the
direction from the side that the Ghast is rotating towards until the
spinning stops.
RESETTING TRIM CONTROLS
To reset trim controls, hold both the throttle and steering joysticks diagonally outwards when the Ghast is grounded. A red light on the Ghast will
begin flashing, trim controls reset is complete once the red light stops flashing.
NOTE: Do not release throttle and steering joysticks until the red light stops flashing.
4

Publicidad

loading