Descargar Imprimir esta página

Mhouse Kit RME Instrucciones Y Advertencias Para La Instalación Y El Uso página 8

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 30
11 Technical Specifications
RME series tubular motors are manufactured by Nice S.p.a. (TV) I. The company Mhouse S.r.l. is a member of the same group as Nice S.p.a.
NICE S.p.a. observes a continuous improvement policy and reserves the right to modify the technical specifications at any time without notice. In such
cases specified functionality and intended use will not be affected.
Note: all technical specifications refer to a temperature of 20°C.
RME tubular motor
Type
Technology
Power cable
Power supply
Rated current
Torque
Weight lifted (with Ø60 mm roller)
Speed
Maximum number of turns
Precision (resolution) of the electronic limit switch
Continuous operating time
Duty cycle
Remote control facility
Transmitter encoding
Number of transmitters that can be stored
Reception frequency
Receiver sensitivity
Transmitter range
Environmental operating temperature
Use in acidic, saline or potentially explosive
atmospheres
Protection rating
Dimensions / weight
Transmitter TX3
Type:
Technology:
Frequency:
Encoding:
Keys:
Irradiated power:
Power supply:
Battery life:
Environmental operating temperature:
Use in acidic, saline or potentially explosive
atmosphere:
Protection rating:
Dimensions / weight:
12 EC Declaration of Conformity
CE declaration of conformity in accordance with Directives 73/23/EEC; 89/336/EEC and 1999/5/CE
RME15; RME 30; RME45 and TX3 are produced by NICE S.p.a. (TV) I; MHOUSE S.r.l. is a member of the Nice S.p.a. group.
Number: 191/RME
Revision: 0
The undersigned Lauro Buoro, Managing Director, declares under his own responsibility that the product:
Manufacturer's name:
NICE s.p.a.
Address:
Via Pezza Alta 13, 31046 Z.I. Rustignè, Oderzo (TV) Italia
Type:
Tubular geared motor for roller shutters, awnings and solar screens with integral controller and radio receiver
Models:
RME15, RME30, RME45
Accessories:
Radio remote control TX3 or TX4
Complies with the requirements of the following community directives as amended by Directive 93/68/EEC of the Council of 22 July 1993:
• 73/23/EEC; DIRECTIVE 73/23/EEC OF THE COUNCIL of 19 February 1973 concerning the harmonisation of Member States' legislation relative to
electrical material destined to be used within specified voltage limits
• 89/336/EEC: DIRECTIVE 89/336/EEC OF THE COUNCIL of 3 May 1989, for the harmonization of Member States' legislation concerning electro-
magnetic compatibility.
In addition, it complies with the basic requirements of article 3 of the following community directive, for the uses for which the products are designed:
• 1999/5/EC; DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT OF THE COUNCIL of 9 March 1999 concerning radio equipment and tele-
communications terminal equipment and the reciprocal acknowledgement of their compliance.
Oderzo, 3 July 2004
8 Instructions RME
RME15
Tubular geared motor for roller shutters, awnings and solar screens with built-in controller and radio receiver
Asynchronous single-phase motor with 3-stage planetary gear unit; electronic type limit sensing
Length approx. 3 m, cable type H05VV-F (only for indoors use)
0,8A
15Nm
28Kg
16 rpm
43
better than 0,5°
Maximum 20% (for example, 1 minute of operation must be followed by a pause of at least 5 minutes)
64 bit rolling code (18 billion billion combinations)
Better than 0.6µV (with direct coupling)
Estimated at 50-100m in optimal open field conditions; 20-30m indoors
(the range varies in the presence of obstacles and electromagnetic interference).
Tube Ø45 mm; length 570 mm, approx. weight 2700g
Radio transmitters for automations of awnings and roller shutters, etc.
Radio carrier AM OOK coded modulation
64 bit rolling code (18 billion billion combinations)
3, each key can be utilized for the various command functions of the same motor,
or to command different motors or automations that are compatible with the encoding
6V +20% –40% with 2 Lithium batteries type CR2016
3 years, estimated on the basis of 10 commands/day lasting 1s at 20°C
(battery efficiency falls at lower temperatures)
IP40 (use in the home or protected environments)
RME30
230Vac (+10% -15%) 50Hz
1,3A
30Nm
56Kg
16 rpm
43
better than 0,5°
4 minutes maximum
With TX3 or TX4 transmitters
Up to 30 (if stored in mode I)
433.92 Mhz
-20 ÷ 55°C
No
IP44
433.92 Mhz
approx 0.0001W
-20 ÷ 55°C
No
720 x 31 h 11mm / 18g
Lauro Buoro
(Managing Director)
RME45
1,15A
45Nm
90Kg
12 rpm
30
better than 0,4°

Publicidad

loading

Este manual también es adecuado para:

Kit rme start