Connection Of Accessories; Cleaning Floors - POLTI VAPORETTO SMART 100 Manual De Instrucciones

necessary to wait for the appliance to cool
and the tank can be filled as needed.
1.3 Close the tank cap.
1.4 Insert the steam lock of
the flexible hose. The steam
gun has a safety button
that
start of steam delivery by
children
unfamiliar with how the
appliance
prevent accidental steam delivery push the
button to the OFF position. To restart steam
delivery, push the button to the ON position.
1.5 Connect the cable plug
to an earthed power supply
of the correct voltage.
Completely
power
plugging it into the mains
and before use, and always
use the appliance with the
power cable completely unwound.
1.6
switch.
The power indicator light A
will come on.
1.7 Wait for the "steam
ready" indicator light C to
come
minutes). Polti is now ready for use.
The "steam ready" C indicator light comes
on and goes off during use. This means that
the electrical resistance is working to
maintain constant pressure: it is a normal
phenomenon and you can continue with
your cleaning operations.
When first operating steam, there may be
some drops of water mixed with the steam
due to temperature imbalances.
Direct the first steam jet onto a cloth for a
few seconds.
prevents accidental
or people
works. To
unwind the
cable before
Press the ON/OFF
on (approx.

2. CONNECTION OF ACCESSORIES

button down and separate the components.
Before using the accessories, make sure that
they are firmly in place.
3. STEAM ADJUSTMENT
steam flow. Here are some suggestions for
the choice of steam flow level:
• Maximum level: for encrusted dirt, stains,
sanitising, grease.
4
• Medium level: for carpets, rugs, glass, tiles
etc.
• Minimum level: for vaporising plants and
cleaning delicate
wallpaper, parquet, laminate, etc.
In case of excessive humidity, reduce the
quantity of steam.

4. CLEANING FLOORS

Before using the appliance on delicate
surfaces, ensure that the part in contact
with the surface is free from foreign bodies
that could cause scratches.
Before starting to steam clean, it is good
practice to have
vacuumed the floor.
4.1 Make sure that Section 1 has been
| 11 |
2.1 To attach the extension
hose to the flexible hose
and the floor brush, simply
insert until you hear the
button click indicating that
the accessory is locked in
place. To release
accessories simply hold the
2.2 To connect the small
brush, the
concentrator or
brushes to the flexible hose
or to the extension hoses
insert the accessories and
then turn them until they
are locked in place.
You can optimise the steam
flow by means of the steam
adjustment knob. You can
increase the steam flow by
turning the control in an
anti-clockwise direction.
Turning it in a clockwise
direction reduces
fabrics, upholstery,
previously swept
the
steam
the
the
or