Manuales relacionados para Truper LIRO-5N
Resumen de contenidos para Truper LIRO-5N
- Página 1 Manual Variable speed 0.34 Hp 5” random orbit Power Sanding disc sander Applies for: Code Model 15399 LIRO-5N LIRO-5N Read the user’s manual thoroughly CAUTION before operating this tool.
- Página 2 Manual before Parts using the tool. Preparation Keep this manual for future references. Start up The illustrations in this manual are for reference Maintenance only. They might be different from the real tool. Authorized Service Centers Warranty policy LIRO-5N ENGLISH...
- Página 3 Technical data LIRO-5N Code 15399 Description Variable speed random orbit sander Base 5” Voltage 127 V~ Frequency 60 Hz Current Power 0.34 Hp Speed 7 000 OPM - 13 000 OPM Dust collection Duty cycle 50 minutes work per 20 minutes rest. Daily maximum, 6 hours.
- Página 4 General power tool safety warnings WARNING! Read carefully all safety warnings and instructions listed below. Failure to comply with any of these warnings may result in electric shock, fire and / or severe damage. Save all warnings and instructions for future references.
- Página 5 Safety warnings for orbit sander CAUTION WARNING • Observe the applicable regulations • Remove the dust collecting when sanding painted surfaces. Use special care when the container before sanding metal. Sparks may ignite dust paint is lead-based. and the inner pouch. •...
- Página 6 Preparation Sanding Disc Selection Grain Type 60 or lower very coarse • Grains available vary from very coarse to very fine. 80 - 100 coarse • Coarse grain is used to sand rough surfaces, medium grain, 120 - 150 medium for light work and fine grain is for smooth finish.
- Página 7 Start up Switch On • Connect the plug into the power outlet. • To start the tool, press switch (C) into the ON position ( I ). • To shut off the tool, press the switch to the opposite side. CAUTION Do not start the tool when the sander surface is onto the work piece.
- Página 8 Maintenance Cleaning and Care Always keep the ventilation slots in the motor housing clean and free of obstructions. After each use apply compressed air. In the event of malfunctioning go only to a Authorized Service Center. Carbon Brush Replacement • Carbon brushes need to be checked regularly and when worn, replaced in a Authorized Service Center.
- Página 9 In the event of any problem contacting a Authorized Service Center, please see our webpage www.truper.com to get an updated list, or call our toll-free numbers 800 690-6990 or 800 0187-873 to get information about the nearest Service Center. DE TODO PARA LA CONSTRUCCIÓN FIX FERRETERÍAS...
- Página 10 06060, where you can also purchase parts, components, consumables and accessories. The costs of transportation of the product that derive from its fulfillment of its service network are included. Truper will not require any proof of purchase to make the warranty effective. Phone number 800-018-7873. Made in China.