Markibar ORHI Manual De Instrucciones página 43

12.- Annex I: Holder magnetic sensor.
(Only Orhi model, class A).
As explained in section 5.3.3, the grinder has several systems for choosing the
holder, which can be programmed by Technical Services. The most convenient of
them is the holder magnetic sensor identification system, which recognises if the
holder that activates the grinder is for 1 or 2 cups of coffee, before supplying the
corresponding amount automatically.
A tag or identifier must be placed on the 2-cup holder so the grinder distinguishes
between it (and supplies enough coffee for 2 cups) and the holder without a tag (in
which it supplies enough for 1 cup only).
Proceed as follows to install the identifier:
2.- Attach the Tag as shown in the image, with its inclined face opposite the grinder
(see detailed assembly instructions, supplied with the tags).
K
mar
like the one in the diagram are supplied,
to be placed on the 2-cup holders.
43
1.- In Orhi class A grinders, two Tags