MonsterShop 10667 Manual De Instrucciones página 7

USER GUIDE
OPERATION INSTRUCTIONS
Music Playback
Press the door latch to open the top compartment. Once open you can load a CD, USB
device or memory card. To close the window, gently push it back in place.
CD Playback
1) Place a CD on to the disc tray.
2) Take care not to touch the CD laser and ensure that the CD label is facing upwards.
3) Gently move the switch arm so that it is on top of the CD. The CD will then start spinning
and play.
4) If the message 'OP' appears on the juke boxes LCD display screen in the mode for CD
playback, the tone arm has not been moved across so it is on top of the CD. The correct
position is for the tone arm to be angled to the right and be on top of the CD.
5) Using the mode selector dial, ensure it is turned to CD/USB/SD card, or press the CD-
MP3, USB SD mode button on the remote control.
6) Press play!
USB/Memory Card
1) Ensure the juke box is turned off before inserting the USB device or memory card. Ensure
the music files are saved in FAT32 format.
2) Using the mode selector dial, ensure it is turned to CD/USB/SD card, or press the CD-
MP3, USB SD mode button on the remote control.
3) Press play!
AUX Cable
1) Ensure the AUX IN switch at the back of the Jukebox is in the ON position.
2) Ensure the function dial is turned to AUX in position.
3) Plug the AUX in lead at the back of the juke box into your iPhone/iPod or other MP3
device. The AUX lead needs to be plugged into the earphone socket of your iPhone/iPod
or other MP3 device.
4) Ensure line out switch at the back of the Jukebox is in the off position when using AUX in.
5) Ensure the speaker switch is switched to on if none are connected.
6) Press play! If you cannot hear anything, turn up the volume on the juke box or remote
control.
10667 - JUKEBOX
07