Publicidad
Idiomas disponibles
Idiomas disponibles
USER GUIDE
OPERATION INSTRUCTIONS
Program Mode
This can be done using the remote control or pressing buttons on the Jukebox.
1) While playing back from a music source, press the stop button.
2) Press the program button to enter the program mode. The word PROG will flash in the
bottom left corner of the display screen. A position number will also be flashing on the
screen.
3) Press the next or back buttons to select which track you want to program into position.
When you have made your selection, press the program button to save it.
4) You can then repeat the same steps to fill in more positions.
5) When done, press play to begin your music playback. You can do this at any stage once
you have programmed the amount of tracks you want.
6) At any stage during the program process you can press stop to cancel.
7) FUL will display on the LCD screen when the max amount of positions have been filled.
Bluetooth
1) Put the mode selector switch to "BT-AUX" position.
2) Adjust your settings on the Bluetooth device and ensure that Bluetooth connection is
turned on.
3) The LED light will be flashing on the Bluetooth indicator on the juke box. Pair your
device with the jukebox. The device will be displayed as "JUKEBOX", the password is
"0000"
4) When the red LED light begins to flash slowly, device and Bluetooth pairing has been
successful and you can now begin your music playback.
Note: Ensure the "AUX" in switch on the back of the juke box is in the off position.
5) The Bluetooth control panel is on the side of the juke box.
Line Out Switch
You have the option to use the line out ports to connect an external amplifier device, and
the option to connect your own external speakers.
If you do not connect anything to line out ensure the LINE OUT SWITCH is in the OFF
position to playback through the Jukebox.
If you do not connect any external speakers, ensure the SPEAKER SWITCH is in the ON
position to playback through the Jukebox.
08
Publicidad
