Publicidad
Step 14
To make adjustments to the drawers, loosen SCREW #3 in the SLIDES a 1/4
å
turn, then turn the cam clockwise or counter-clockwise. Notice how the drawer
raises or lowers as you turn the cam. By adjusting the drawers this way, it will
help the DRAWER FRONTS line up better when closed. Tighten the SCREWS
when fi nished with adjustments.
NOTE: Please read the back pages of the instruction booklet for important
å
safety information.
This completes assembly. Clean with your favorite furniture polish or a damp
å
cloth. Wipe dry.
And to celebrate, why not share your success story?
The higher the screw in the oblong hole,
the higher your drawer front will be. The
lower the screw, the lower the drawer front.
Page 18
Loosen screw #3 a 1/4 turn, turn the cam a 1/4 turn
maximum in both the clockwise and counter-clockwise
directions to make adjustments, and then tighten screw #3.
Cam
417244
www.sauder.com/services
Publicidad
